| AMMUNITION REMOVAL FROM FIREARM | $45 |
| APPRAISAL (Written out estimate of value) | $45.00 |
| BARREL-DENTS REMOVED( AT CUSTOMER RISK) | $105.00 |
| BARREL-STRAIGHTEN BARREL( AT CUSTOMER RISK) | $110.00 |
| BLUE O/U BARREL ONLY | $305.00 |
| BLUE OVER/UNDER | $495.00 |
| BLUE RECEIVER | $190.00 |
| BLUE SINGLE BARREL | $190.00 |
| BLUE SINGLE BARREL GUN | $335.00 |
| BLUE SMALL PARTS | $55.00 |
| BLUE SXS | $495.00 |
| BLUE SXS BARREL ONLY | $305.00 |
| BLUE-RUST BARREL | $190.00 |
| BORE SIGHT | $45.00 |
| CASE COLOR | $695.00 |
| CHAMBER CASTING TO DETERMINE CALIBER/ CHECK HEADSPACE+TEST FIRE | $120.00 |
| CHARGE FOR SHIPPING COD | $25.00 |
| CHECK HEADSPACE | $65.00 |
| CHOKE -OPEN CHOKE | $95.00 |
| CHOKE TUBE SIEZED-REMOVE FROM BBL | $65.00 |
| CHOKE TUBES TRU CHOKE TUBES | $295.00 |
| CHOKE TUBES-BRILEY | $345.00 |
| CHOKE-POLY CHOKE-INSTALLED | $195.00 |
| CLEAN-OIL-TEST FIRE SHOTGUNS | $99.95 |
| CLEAN-REMOVE COSMOLINE | $100.00 |
| CLEAN–OIL–AND TEST FIRE-RIFLE | $99.95 |
| CLEAN, OIL AND TEST FIRE HANDGUN | $90.00 |
| CLEAN, OIL, TESTFIRE – O/U | $155.00 |
| CLEAN, OIL, TESTFIRE – SXS | $155.00 |
| CROWN BARREL SHOTGUN | $45.00 |
| CUSTOMER SATISFACTION | $0.00 |
| CUT & CROWN AND RE-BEAD BARREL | $145.00 |
| CUT & CROWN BARREL SHOTGUN | $120.00 |
| CUT & CROWN RIFLE BARREL | $150.00 |
| CUTTS COMP.-INSTALLED | $185.00 |
| DELUXE CLEANING ON WOOD/ FULL LENGTH STOCK | $145.00 / $165 |
| DEPOSIT (DEPOSITS ARE NON-REFUNDABLE AS THEY REPRESENT THE WORK TO RESEARCH THE PROBLEM) | $45.00 |
| DIAGNOSTIC | $55.00 |
| DISASSEMBLE & REASSEMBLE GUN | $45.00 |
| DISASSEMBLE UPPER THREAD BARREL 1/2 X 28 TPI | $175.00 |
| DONUT POSTS | $80.00 |
| DRAW FILE | $100.00 |
| DRILL AND TAP (PER HOLE) | $30.00 |
| DRILL AND TAP-SETUP FEE | $45.00 |
| DUCK BILL ON RECEIVER | $120.00 |
| FINISH GRIPS HAND GUN | $135.00 |
| FINISH STOCK & FOREND | $335.00 |
| FINISH STOCK & FOREND -SXS OR O/U | $545.00 |
| FINISH STOCK- RIFLE | $445.00 |
| FREIGHT CHARGES BOX ONLY | $35.00 |
| FREIGHT CHARGES WITH HARD CASE | $55.00 |
| FULL LENGTH RAMP RECEIVER 5/16″ | $115.00 |
| FUNCTION TEST GUN | $45.00 |
| Glass Bedding Rifle | $375.00 |
| GOLD PLATE TRIGGER | $90.00 |
| GUN TRANSFER | $35.00 |
| HANDLING / PACKING | $15.00 |
| HAZARDOUS WASTE / DISPOSAL / TEST FIRE | $10.00 |
| HAZARDOUS WASTE/ DISPOSAL / TEST FIRE AMMO PROVIDED | $0.00 |
| HEADSPACE- SET THE HEADSPACE | $90.00 |
| INTERNET SPECIAL: SIMMONS FLOATING RIB, REBLUE, JEWEL BOLT/CARRIER, MEDIUM FANCY WOOD | $1,675.00 |
| JEWEL RIFLE BOLT | $90.00 |
| JEWELL BOLT AND CARRIER | $120.00 |
| LABOR (GUNSMITHING) | $100/HR |
| LABOR (O/U & SXS GUNSMITHING) | $120/HR |
| LENGTHEN FORCING CONE | $110.00 |
| LIGHTEN TRIGGER PULL ON HANDGUN | $135.00 |
| LIGHTEN TRIGGER PULL ON RIFLE OR SHOTGUN | $125.00 |
| MINIMUM CHARGE | $45.00 |
| MONOBLOCK SEPERATION REPAIR & BLUE | $485.00 |
| MOUNT SCOPE AND BORE SIGHT | $95.00 |
| MUZZLE BRAKE RIFLE, threading included AND WITH THREAD PROTECTOR | $355.00 |
| MUZZLE BREAK PROVIDED | $55.00 |
| PAD-CUSTOMER PAD INSTALL | $90.00 |
| PAD-INSTALL SPACER AND FIT | $45.00 |
| PAD-KICKEEZ -INSTALL | $140.00 |
| PAD-SHORTEN STOCK AND RESET PAD | $135.00 |
| PAD-WINCHESTER-INSTALL (Pad Only $57) | $145.00 |
| PATTERN CHECK BY TEST FIRE | $95.00 |
| PIN & WELD | $125 |
| PLANO GUN CASE | $35.00 |
| POLISH BARREL | $90.00 |
| POLISH BOLT & CARRIER | $90.00 |
| Qualify Chamber, New Chamber Ring, Headspace & T/F | $300.00 |
| REHINGE GUN | $145.00 |
| RELINE/SLEEVER BARREL | $310.00 |
| REPAIR CRACK IN BUTT STOCK | $95.00 |
| SAFETY CHECK ON GUN | $55.00 |
| SHIPPING | $55.00 |
| SHIPPING CARDBOAD BOX | $45.00 |
| SIGHT CTR INSTALL | $25.00 |
| SIGHT FRT & CTR INSTALL | $50.00 |
| SIGHT FRT NSTALL | $25.00 |
| SIGHT HI VIZ-INSTALL (Sight $20) | $45.00 |
| SIGHTS HI VIZ- COMP SIGHT | $45.00 |
| SIGHTS ON HANDGUN-INSTALL | $45.00 |
| SIMGUARD COATING FOR AR STYLE RIFLE (OR SIMILAR) | $320.00 |
| SIMGUARD COATING FOR PISTOL | $260.00 |
| SIMGUARD COATING FOR SHOTGUN/RIFLE | $290.00 |
| SIMGUARD O/U | $390.00 |
| SIMGUARD SCOPE RINGS & BASES | $45.00 |
| SLING SWIVELS INSTALL | $80.00 |
| SOLDER FOREND LUG | $110.00 |
| SOLDER SIDE RIBS | $525.00 |
| SOLDER SIDE RIBS & REBLUE BBLS / WITH RECIEVER | $525 / $715 |
| SOLDER SOLID RIB | $525.00 |
| SOLDER VENT RIB & REBLUE BARREL ONLY | $450.00 |
| STAKE FEED LATCH | $25.00 |
| STAMP RIFLE CALIBER ON BARREL | $75.00 |
| STAMP SERIAL NUMBER | $125 |
| THREAD BARREL-for Suppressor etc. | $175.00 |
| VENT RIB & REBLUE O/U OR SXS BBL ONLY | $495 |
| VENT RIB AND NO BLUE | $225 |
| VENT RIB AND REBLUE | $500 |
| VENT RIB BBL ONLY REBLUE | $390 |
| VENT RIB NO REBLUE | $165.00 |
| VENT RIB REPAIR & BLUE BARREL ONLY | $295.00 |
| VENT RIB-No REBLUE (1 1/4 INCH MAX HEIGHT) | $225 |
| VENT RIB-OLYMPIC & REBLUE (1 1/4 IN MAX HEIGHT) | $660 |
| VENT RIB-OLYMPIC & REBLUE BARREL ONLY (1 1/4 IN MAX HEIGHT) | $545 |
| VENT RIB-REMOVE RIB | $75.00 |
| VENT RIB-RIB & REBLUE OVER/UNDER OR SXS | $645 |
| VENT RIB-RIB AND REBLUE O/U BARREL | $450.00 |
| VENTILATED RIB-STRAIGHTED | $55.00 |
| WOOD MEDIUM FANCY | $750.00 |
| WOOD UPGRADE FANCY | $1050.00 |